11000 LBS. X 19.6" ORII SERVO COIL FEED LINE, NEW 1996

Description

11000 LBS. X 19.6" ORII SERVO COIL FEED LINE, NEW 1996
TYPE
Coil Feed Lines
BRAND
ORII
MODEL
11,000 lbs Servo Feed Line
YEAR
1996
STOCK #
2533
CONDITION
Used
SPECIFICATIONS
COIL WEIGHT
11000 pounds
COIL WIDTH
19.8 inches
COIL THICKNESS
.090 inches
Standard Specifications
5,000 KG Coil Capacity (11,000 lbs)
100-500 mm Coil Width (3.93 to 19.8" Width)
1400 mm Maximum Coil O.D (55.1")
440-520 mm I.D. Range (17.32"-20.47")
975 mm Mandrel Center Height (38.38")
Left to Right Feed Direction
Coil Reel Model No.: MW-05HKAA-DSZ
Serial No: 96MW-000P
Four leaf mandrel with Keeper Arms
Full Radius mandrel Pads
Pneumatic Clutch and Brake
Adjustable tensioning
Hydraulic mandrel expansion
Traveling coil load car with track
Powered lift and travel
Powered Straightener Model No: LHJ05BCAB-S
Serial No: 96LHJ0004
100-500 mm Range Coil Width (3.93 to 19.8" Width)
.3 - 2.3 mm Material Thickness  (.012 to .090")
Coil Hold down arm with Motorized end wheel
Seven straightening rolls with manual hand crank adjustment
2.5" Diameter straightening rolls
Air Operated upper pinch Roll actuation
Manual upper straightening roll adjustment
Peeler Threader Station
Roll position indicators
Entry pinch roll with air operated adjustment
Adjustable stock width edge guides
Cascade loop support rollers
Sloped front control console
Photo Switch Loop Control
Single Side Exit Thread Table Model# GLM05AAX
Pneumatic Swing
Servo Roll Feed Model No: ACB05JAFX
Full Width Upper and Lower feed Rolls
Matte Chrome Finish on upper and lower feed rolls
Heavy duty cabinet base mounted
Job memory batch count jog to length
Sloped front control console
AC Servo drive and Controls System
* Operators manual and control schematic included
We welcome your questions at https://presses.com/
ABOUT US
S&G Press and Machinery is a Global Leader in Buying and Selling Used Metal Stamping Equipment!  Founded in 2000, S & G Press and Machinery Sales started with the purchase and sale of a single press. Today, S&G Press operates a state-of-the-art 56,000 sq. ft. warehouse in Livonia, Michigan, just minutes away from Detroit Metropolitan Airport. S&G stocks over 100 presses and 300 pieces of ancillary stamping and feeding equipment, available for inspection at your convenience.