PXI-8186 Controller National Instruments

Description

This is an used National Instruments PXI Controller P/N PXI-8186, the controller was pulled from a working environment and has been tested OK. Controller is based on a Pentium R (4) Microprocessor and comes with 512MB of RAM and a hard drive of 30 Gb.
Physical
Board dimensions................................... PXI 3U-size module 8.1 by 13 by 21.6 cm (3.2 by 5.1 by 8.5 in.)
Slot requirements ................................... One system slot plus three
controller expansion slots
Compatibility ......................................... Fully compatible with
PXI specification
Weight.................................................... 1.0 Kg (2.2 lb) typical
Relative humidity range..........................10% to 90%, noncondensing (Tested in accordance with IEC-60068-2-56.)
Altitude ...................................................2000 m (at 25 °C ambient temperature)
Pollution Degree .....................................2
For indoor or enclosed area use only.
Storage Environment
NI PXI-8186
Ambient temperature range .............–20 to 65 °C (Tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2.)
Relative humidity range ......................... 5% to 95% noncondensing
(Tested in accordance with IEC-60068-2-56.)
Shock and Vibration
Operational shock .................................. 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC-60068-2-27. Test profile developed in accordance with
MIL-PRF-28800F.)
Random vibration
Operating ........................................ 5 to 500 Hz, 0.3 grms
(with solid-state hard drive)
Nonoperating .................................. 5 to 500 Hz, 2.4 grms
(Tested in accordance with IEC-60068-2-64. Nonoperating test profile
exceeds the requirements of MIL-PRF-28800F, Class B.)
Note For full EMC compliance, you must operate this device with shielded