TACKLIFE DMS03 Stud Finder Upgraded Wall Scanner 4in1 Center Finding - Black

Description

BRAND NEW in Original SEALED Retail Packaging
TACKLIFE DMS03 Stud Finder Upgraded Wall Scanner 4in1 Center Finding Electronic
FREE SHIPPING - USPS First Class Mail
TACKLIFE DMS03
Stud Finder
The tool is used to detect metals (ferrous and non-ferrous metals), wood studs, and “live” AC wires in walls, ceilings and floors. To achieve the best performance of detection, please read this user’s manual carefully and thoroughly before using the tool.
Unlike the other stud finder, the TACKLIFE DMS03 has additional function for detecting the center of the stud.
What's more, it has three different indicator light, the function is as bellow:
Green
: The detector has calibrated automatically and get read
Yellow
: Getting closer to the target
Red
: The center of the sensor was located
【4 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall.
【ADVANCED ACCURACY】 Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm). Accuracy rate increased from 80% to 98%!
【UPGRADED LCD SCREEN & THREE SIGNAL LIGHTS 】 Instead of the traditional LCD screen, TACKLIFE DMS03 stud sensor equipped HD DISPLAY SCREEN which could show scan modes, detection depth, detection strength, battery level clearly. The signal light shows green when the detector get ready, as getting closed to the center of stud, the indicator will turn yellow to red.
【AUTOMATIC CALIBRATION & AUDIBLE WARNING】 The wall detector could calibrate automatically – no further action required! The fast detection saves users time and efforts, making the task completion easier. Audible warning which helps you avoid drilling or hammering into a water pipe or electrical wire.
【USER-FRIENDLY】 This metal detector with ergonomic design, which satisfying your DIY and home projects; the cotton on the back has prevented the damage caused to the wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag
FOUR SCANNING MODES
Wooden scan up to 0.75 inches(20mm)
Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm)
Non-ferrous metals up to 3.15 inches (80mm)
Live AC wires up to 2 inches (50mm)
Deep mode up to 1.5 inches (38 mm)
Scanning for wood studs
Maximum detection depth: Exact mode:20mm; Deep mode:38mm.
Wood detection mode will detect objects in gypsum drywall, plywood sheathing, bare wood flooring, coated wooden wall. Wood detection mode will not detect objects in concrete, mortar, block, brick work, plaster, carpeting, foil-faced materials, metallic surfaces, ceramic tile, glass, or any other dense material.
Scanning for metal objects
Maximum detection depth: Ferrous metals: 100mm; Non-ferrous metals (Copper): 80mm.
When the metal is detected, the screen will show the depth value synchronously, but if the signal is weak, or the tool cannot distinguish that the metal object is magnetic or non-magnetic, the depth value will not be displayed. The depth value is the distance from the center of the sensor to the scanned object. At the position of minimum depth value, the metal object is located near the center of the sensor.
Scanning for wires
Maximum detection depth: 50mm (220V@50Hz / 110V @ 60 Hz).
The signal strength of a “live” wire depends on the position of the cable. Therefore, apply further measurements in close proximity or use other information sources to check if a “live” wire exists.
Specifications
Automatic switch-off: Approx.5 minutes of inactivity
Operating Temperature: -10℃ to 50℃ / 14℉ to 122℉
Storage Temperature: -20℃ to 70℃ / -4℉ to 158℉
Operating relative humidity: 35% - 55%RH
Power Source: 1*9V Battery